TM 5-6115-596-14
c.
Installation.
(1) Position resilient mount between regulator support and inner
frame.
Figure 5-21.
Generator regulator resilient mounts.
(2) Secure mount to frame with two screws.
(3) Secure regulator to frame with three washers and screw.
NOTE
If left rear mount is removed,
also install regulator ground
lead.
(4) Tighten three mount screws securing other regulator mount-
ings.
Section IX.
PREPARATION FOR SHIPMENT AND STORAGE
5-34.
General.
This chapter contains instructions for shipping, storage, and load-
ing of the generator set.
Change 2
5-52
