TS 6115-329-14/4-28
TM 5-6115-329-14
TO 35C2-3-440-1
(3) Close cover.
4-29. Terminal Load
Clean all parts in a well-ventilated
area. Avoid inhalation of solvent
fumes and prolonged exposure of skin
to cleaning solvent. Wash exposed
skin thoroughly. Dry cleaning solvent
(Fed. Spec. P-D-680) used to clean
parts is potentially dangerous to per-
sonnel and property. Do not use near
open flame or excessive heat. Flash
point of solvent is 100° to 138° F. (38°
to 59° c.).
a. Removal. Refer to figure 4-28 and the follow-
ing instructions and remove the terminal load.
(1) Lift cover, tag and disconnect leads.
(2) Remove nuts securing the terminal loads
to the terminal load block.
(3) Remove the terminal loads.
Figure 4-28. Terminal load and terminal block assembly, removal and installation.
b. Cleaning. Clean the load terminals with a
Replace damaged load terminal.
clean cloth dampened in cleaning solvent, Fed. Spec.
d. Installation.
P-D-680, and dry thoroughly.
Repair. Inspect load termi-
(1) Secure the terminal loads
c. Inspection and
load block assembly with nuts.
nals for cracks, burrs, nicks, or damaged threads.
4-44
to the terminal
