TS 6115-329-14/4-30
TM 5-6115-329-14
TO 35C2-3-440-1
Figure 4-30. Fuel tank, selector valve and fuel strainer, removal and installation.
b. Cleaning. Clean exterior portion of fuel tank
4-33. Cap and Chain Assembly (Fuel
with a clean cloth dampened in cleaning solvent,
Tank)
Fed. Spec. P-D-680, and dry thoroughly.
.
c. Inspection and Repair. Inspect fuel tank for
dents and for evidence of leaking. Replace defective
Clean all parts in a well-ventilated
fuel tank.
area. Avoid inhalation of solvent
d. Installation.
fumes and prolonged exposure of skin
(1) Connect selector valve and fuel strainer to
to cleaning solvent. Wash exposed
fuel tank (fig. 4-30).
skin thoroughly. Dry cleaning solvent
(2) Position fuel tank in straps and secure
(Fed. Spec. P-D-680) used to clean
with two screws.
parts is potentially dangerous to per-
(3) Reinstall line.
(4) Attach grounding strap (fig. 4-29).
sonnel and property. Do not use near
open flame or excessive heat. Flash
point of solvent is 100° to 138° F. (38°
to 59° C.).
4-47
