TS 6115-329-14/4-25
TM 5-6115-329-14
TO 35C2-3-440-1
Figure 4-25. Radio interference suppression components, removal and installation.
(2) Control Panel Bonding Strap
(a) Remove nuts and lockwashers from the
control panel bonding strap.
(b) Remove bonding strap.
(3) Engine Bonding Strap
(a) Remove screws from engine bonding
strap.
(b) Remove bonding strap.
b. Cleaning and Inspection. Clean bonding
straps with a clean cloth. Inspect for frayed or bro-
C. Repair. Replace damaged or defective parts as
required.
d. Installation
(1) Engine Bonding Strap. Secure engine
bonding strap to bracket with screws.
(2) Control Panel Bonding Strap.
Secure
control panel bonding strap to generator housing
and control panel with lockwashers and nuts.
(3) Fuel Tank Bonding Strap. Secure fuel
tank bonding tank to frame and fuel tank with lock-
ken braid. Inspect mounting hardware for cracks,
washers and nuts.
chips, or damaged threads.
Section VIII.
Maintenance of the Engine Assembly
4-20. Engine
Refer to TM 5-2805-14/TO 38G2-102-2 for trou-
LO 5-2805-256-12/T0 38G2-102-2LC-1
bleshooting and maintenance instructions and to
to the MIL-STD Engine Model 1A08-3.
pertaining
4-39
