TM 5–6115-323-14
CHAPTER 7
MAINTENANCE OF THE FRAME ASSEMBLY
7-1. General
The frame serves as the mounting base for all
components of the generator set. In addition to its
use as the base, its design is such that it affords
protection for the components mounted within,
and it provides an easy means of carrying the unit
when movement is required. This paragraph pro-
vides intermediate (field) (direct support and gen-
eral support) and depot maintenance for the
frame assembly.
7–2. Frame Assembly
a. Removal and Disassembly
(1) Remove the engine (para 6-1) and genera-
tor (para 6-4 and 6-5).
(2) Refer to figure 7-1 and disassemble the
frame.
b. Cleaning, Inspection, and Repair.
(1) Clean all parts thoroughly.
(2) Inspect the frame for distortion, cracks,
dents and broken welds.
(3) Inspect the rails for cracks and elongated
holes.
(4) Inspect the shock mounts for loose or
deteriorated inserts.
(5) Repair the frame and rail as necessary by
straightening, using the cutting and welding
equipment.
(6) Replace an unrepairable frame or rail.
(7) Replace all other defective parts.
c. Assembly and Installation.
(1) Refer to figure 7-1 and assemble the
frame.
(2) Install the engine (para 6-1) and genera-
tor (para 6-4 and 6-5).
7-1
