Figure 8–4. Radio interference suppression components,
removal and installation (DC Unit).
TM 5–6115-323-14
(3) If this reading does not occur, then replace
the capacitor.
8-5. Wiring Harness
a. Inpection. Inspect the wiring and wiring har-
ness for breaks, poor connections at the terminals,
broken or frayed insulation, and other damage.
b. Test. Test the wiring for continuity using a
multimeter.
c. Repair.
(1) Wrap slight insulation deterioration with
electrical tape.
(2) Make soldering connections wherever pos-
sible.
d. Removal. Tag each wire and corresponding
terminal to insure correct installation and re-
placement.
e. Installation. Install wires in the reverse or-
der of removal and remove all tags.
8-7
