TM 5-6115-323-14
TO 35C2-3-385-1
Figure 6–2. Control box and bracket, removal and installation.
Section IV. GENERATOR
6-4. Generator (AC Units)
a. Removal.
(1) Remove the control box (para 6-3).
(2) Remove the fuel tank and bracket (paras
4-22 and 4-23).
(3) Remove the generator and cover.
(4) Refer to figure 6-3 and remove the gener-
ator fan.
(5) Using figure as a guide, remove the
generator stator housing.
(6) Use a proper pulling tool (fig. 5-1) and
remove the generator rotor (14, fig. 9–1) from the
crankshaft of the engine.
(7) Refer to figure 6-5 and remove the gener-
ator adapter from the engine.
b. Installation.
(1) Refer to figure 6-5 and install the genera-
tor adapter on the engine.
(2) Position the generator rotor (14, fig. 9-1)
on the crankshaft of the engine.
(3) Using figure 6-4 as a guide, install the
generator stator housing.
(4) Refer to figure 6-3 and install the genera-
tor fan.
(5) Install the generator and cover.
(6) Install the fuel tank and bracket (paras 4-
22 and 4-23).
(7) Install the control box (para 6-3).
6-5. Generator (DC Unit)
a. Removal.
(1) Remove the control box (para 6-3).
(2) Remove the fuel tank and bracket (paras
4-22 and 4-23).
(3) Remove the generator end cover.
6-2
Change 9
