TM 5-6115-271-14
TO 35C2-3-386-1
TM-05926A-14
NAVFAC P-8-613-14
REMOVAL/lNSTALLATION OF MAJOR COMPONENTS
GENERAL
Section I.
This chapter contains removal and installation instructions for the major components. The three major com-
ponents are the control box assembly, the generator and the engine.
A. GENERATOR HOUSING REMOVAL.
ENGINE
Section Il.
6-1. Engine
b. Installation,
(1) Refer to figure 6-2 and install the engine.
a. Removal.
(2) Install the generator (fig. 6-1).
(1) Remove the starting switch, receptacle, and
(3) Install the fuel tank (A, fig. 4-12).
bracket if installed (fig. 4-22).
(4) Connect the fuel line (fig. 4-19).
(2) Disconnect the fuel Line (fig. 4-19).
(5) Install the starting switch, receptacle, and
bracket if removed (fig, 4-22).
(3) Remove the fuel tank (A, fig. 4-12).
(4) Remove the generator (fig. 6-1).
(5) Refer to figure 6-2 and remove the engine.
NOTE
When a model 4A032-1 or 4A032.2 engine is replaced with a model 4A032.3 engine the
Generator Set ID plate must also be replaced, changing the MEP-OXXA number to
MEP-OXXC. NSN on the plate as well as on accountable (including maintenance)
records must also be changed.
