Figure 4-77. Battery charging electrical receptacle
connector and bracket, removal
and installation (Model MEP-
Cleaning, Inspection and Repair.
Clean the cables, connector and
bracket with a clean, dry cloth.
Inspect the cables for breaks,
loose terminals, oil-soaked or
deteriorated insulation and other
mounting hardware for cracks,
breaks or other damage.
Replace a damaged or defective
Installation. Refer to figure 4-77 and install
connector and bracket.
Air Baffles (Model MEP-018A)
Remove the battery, figure 4-78.
Remove the control cabinet, figure
Remove the air baffles, fig. 4-80.
Change 8 4-88