Figure 4-73. Lifting bracket, blower cover, and guard frame, removal and installation (Model MEP-023A)
Cleaning, Inspection and Repair.
l parts in a well-ventilated area. Avoid inhalation of
exposure of skin to cleaning solvent.
Wash exposed skin thoroughly. Dry
cleaning solvent (Fed. Spec. P-D-680
and P-S-661) used to clean parts is
potentially dangerous to personnel
and property. Do not use near open
flame or excessive heat.
Flash point of solvent is 100° F(38°C).
Clean items with cleaning solvent,
Federal Specification P-D-680 or
P-S-661 and dry thoroughly.
covers for cracks, breaks or other
defects. Replace a defective part.
Installation of Shroud Cover (Model MEP-
Install cover (7, fig. 4-72) and