Figure 4-75. Toolbox, removal and installation, (Model MEP-018A).
Cleaning, Inspection and Repair.
parts in a well-ventilated area. Avoid inhalation of
solvent fumes and prolonged exposure
of skin to cleaning solvent. Wash
exposed skin thoroughly. Dry cleaning
solvent (Fed. Spec. P-D-680 and P-S-
661) used to clean parts is potentially
dangerous to personnel and property.
Do not use near open flame or excessive
heat. Flash point of solvent is 100°F
Clean items with cleaning solvent,
Federal Specification P-D-680 or
P-S- 661 and dry thoroughly.
Inspect for cracks, breaks, or
defective bracket or fan cover.
Installation. Refer to figure 4-74 and install
the lifting eye bracket and fan
Rail Guard, Ground Stud, Tow Bolt (Model
Removal. Refer to figure 4-76 and remove
guard, stud and bolts.
Change 8 4-86