Cleaning, Inspection and Repair.
Clean all parts in a well-ventilated
area. Avoid inhalation of solvent
fumes and prolonged exposure of
skin to cleaning solvent. Wash
cleaning solvent (Fed. Spec. P-D-680
and P-S-661) used to clean parts is
potentially dangerous to personnel
and property. Do not use near open
flame or excessive heat. Flash point
of solvent is 100°F (38°C).
Clean the toolbox, bracket, rail guard
and lifting eye with cleaning solvent, Fed. Spec. P-D-680
or P-S-661 and dry thoroughly.
Clean the vibration mounts with a
clean, dry cloth.
Inspect the toolbox, bracket, frame,
lifting eye and vibration mounts for cracks, breaks,
deterioration and other damage. Replace if damaged.
Installation. Refer to figure 4-81 and install
the tool box, brackets, guard and mounts.
Grounding Stud Terminal (Model MEP-023A)
Removal. Refer to figure 4-82 and remove
the grounding stud terminal.
Figure 4-82. Ground stud terminal, removal and installation (Model MEP-0923A).
Change 8 4-93