TM 5-6115-596-14
Inspect wires, terminals, and connec-
Inspection and Repair.
b.
tors for cracks, breaks, burned areas, and worn or damaged insulation.
or connectors show any one of these defects, re-
If wires, terminals,
pair wiring harness as described in paragraph 4-32.
Installation.
c.
(1) Position wiring harness (10) to generator set and connect
regulator generator connector (11) to generator regulator (3).
(2) Connect circuit 478 lead (5), circuit 2 lead (4), and cir-
cuit 1 lead (7) to starter-generator (6) and secure with three
washers (8) and nuts (9).
relay (2).
Legend for figure 4-15.
connector lead
8 - Generator lead washer
2 - Relay and housing assembly
9 - Generator lead nut
3 - Generator regulator
1 0 - Generator-to-regulator
4 - Circuit 2 lead
wiring harness
11 - Regulator generator
5 - Circuit 478 lead
connector
6 - Start-generator
4-38
