TM 5-6115-596-14
A-FEMALE-TYPE PLUG ASSEMBLY
1-STRIP LEAD INSULATION EQUAL TO DEPTH OF CONTACT SOCKET SOLDER WELL.
2-REMOVE NUT FROM PLUG ASSEMBLY AND SLIDE OVER CABLE.
3-REMOVE GROMMET FROM PLUG ASSEMBLY.
4-PASS LEAD ENDS THROUGH GROMMET, INSERT INTO CONTACT SOCKET SOLDER WELL, AND SOLDER.
5-SLIDE GROMMET OVER CONTACT SOCKET AND PRESS INTO PLUG ASSEMBLY UNTIL SEATED.
6-THREAD NUT TO PLUG ASSEMBLY.
B-FEMALE-TYPE RECEPTACLE ASSEMBLY
1-STRIP LEAD INSULATION EQUAL TO DEPTH OF CONTACT SOCKET SOLDER WELL.
2-REMOVE NUT FROM RECEPTACLE ASSEMBLY AND SLIDE OVER CABLE.
3-REMOVE GROMMET FROM RECEPTACLE ASSEMBLY.
4-PASS LEAD ENDS THROUGH GROMMET, INSERT INTO CONTACT SOCKET SOLDER WELLS, AND SOLDER.
5-SLIDE GROMMET OVER CONTACT SOCKETS AND PRESS INTO RECEPTACLE ASSEMBLY UNTIL SEATED.
6-THREAD NUT TO RECEPTACLE ASSEMBLY.
C-FEMALE OR MALE TYPE CONNECTOR ASSEMBLY
1-STRIP LEAD INSULATION EQUAL TO DEPTH OF SOLDER WELL OF CONTACT SOCKET OR CONTACT PIN.
2-REMOVE NUT FROM PLUG ASSEMBLY AND SLIDE OVER CABLE.
3-REMOVE GROMMET FROM PLUG ASSEMBLY.
4-PASS LEAD END THROUGH GROMMET, INSERT INTO .SOLDER WELL OF CONTACT SOCKET OR CONTACT PIN, AND
SOLDER OR CRIMP.
5-SLIDE GROMMET OVER CONTACT SOCKET OR CONTACT PIN AND PRESS INTO PLUG ASSEMBLY UNTIL SEATED.
6-THREAD RETAINING NUT TO SHELL ASSEMBLY,
Figure 4-13.
Connectors and receptacles.
4-35
