TM 5-6115-332-14
P-8-614-14
TO 35C2-3-424-1
(17) Voltage Adjusting Rheostat. The volt-
age adjusting rheostat (fig. 2-3) is located just to
the right of the center of the control panel. To in-
crease the voltage turn the control clockwise to de-
crease the voltage turn the control counter-
clockwise.
(18) Circuit Breaker. The circuit breaker
(fig. 2-3) is located to the right of the upper part of
the control panel. It is a two position, toggle-type
control.
(19) Ammeter Phase Selector Switch. The
ammeter phase selector switch (fig. 2-3), a three-
position rotary-type switch, is located to the right of
center in the lower part of the control panel.
(20) Current Indicator Meter. The current
indicator meter (fig. 2-3) is located in the lower
right corner of the control panel. It is calibrated
from 0 to 125 percent. The scale is redlined in that
scale area above 100 percent. The scale is also
marked with aline at the 80 percent position that is
marked 100 percent at 1.0 power factor (unity).
(21) Frequency Meter (Model MEP-
017A). The frequency meter (fig. 2-3) is located at
the right center of the control panel. The scale of
the meter is graduated from 55 to 65 cycles per sec-
ond (Hertz).
(22) Frequency Meter (Model MEP-
022A). The frequency meter (fig. 2-6) is located at
the right center of the control panel. The scale of
the meter is graduated from 380 to 420 cycles per
second (Hertz).
TS 6115-332-14/2-6
Figure 2-6. Generator frequency meter, (Model MEP-022A).
2-
8
