TM 5-6115-275-14
NAVFAC P-8-615-14
TO 35C2-3-452-1
b.
Cleaning, Inspection and Repair.
(1)
Clean the receptacle with a clean dry
cloth.
(2)
Inspect the receptacle for cracks,
breaks or other damage. Replace a damaged or
defective receptacle.
c.
Installation. Refer to figure 4-83 and install
the slave receptacle.
4-59.
Fuel Drum Adapter Clips
a.
Removal.
(1)
Remove the fuel drum adapter.
(2)
Remove the clips as shown by figure
4-84.
b.
Cleaning, Inspection and Repair.
WARNING
Clean all parts in a well-ventilated
area. Avoid inhalation of solvent
fumes and prolonged exposure of
skin to cleaning solvent. Wash
exposed
skin
thoroughly.
Dry
cleaning solvent (Fed. Spec. P-D-680
and P-S-661) used to clean parts is
potentially dangerous to personnel
and property. Do not use near open
flame or excessive heat. Flash point
of solvent is 100°F (38°C).
(1)
Clean items with cleaning solvent, Fed.
Spec. P-D-680 or P-S-66 1, and dry thoroughly.
(2)
Inspect for cracks, breaks, or other
damage. Replace a damaged clip.
c.
Installation.
(1)
Install the fuel drum adapter clips as
shown by figure 4-84.
(2)
Install
the
fuel
drum
adapter.
Figure 4-84. Fuel drum adapter clips, removal and installation.
Change 8 4-95
