TM 5-6115-275-14
NAVFAC P-8-615-14
TO 35C2-3-452-1
4-60.
Replace
Lost
or
Broken
Terminal
Clip
(Retainer, Safety Clip).
The terminal clip is a component of both the load
terminal and the ground terminal. If the terminal clip is
lost or broken, fabricate as follows: Requisition bulk wire
NSN 9505-01-049-0144, 0.050 inch diameter. Cut off
about 3 inches of the wire. Cut the wire short enough to
keep the clips from touching another terminal or the
generator frame in the open or closed position. Slip the
wire through the hole in the terminal and proceed as
shown in the views below:
Change 8 4-96
