TM 5-6115-275-14
NAVFAC P-8-615-14
TO 35C2-3-452-1
Figure 4-76. Rail guard, ground stud and tow bolts, removal and installation (Model MEP-018A).
b.
Cleaning, Inspection and Repair.
WARNING
parts in a well-ventilated area. Avoid inhalation of
solvent fumes and prolonged exposure
of skin to cleaning solvent. Wash
exposed skin thoroughly. Dry cleaning
solvent (Fed. Spec. P-D-680 and P-S-
661) used to clean parts is potentially
dangerous to personnel and property.
Do not use near open flame or excessive
heat. Flash point of solvent is 100°F
(38°C).
(1)
Clean items with cleaning solvent,
Federal Specification P-D-680 or
P-S- 661 and dry thoroughly.
(2)
Inspect for cracks, breaks or other
damage.
Replace all defective parts.
c.
Installation. Refer to figure 4-76 and install
guard, stud and bolts.
4-54.
Battery
Charging
Electrical
Receptacle
Connector and Bracket (Model MEP- 018A)
a.
Removal. Refer to figure 4-77 and remove
the receptacle connector and
bracket.
Change 8 4-87
