TM 5-6115-275-14
NAVFAC P-8-615-14
TO 35C2-3452-1
(2)
Install channel (4) and shroud (3);
secure with washers (2) and bolts
(1).
e.
Installation
of
Blower
Cover
(Model
MEP023A). Refer to figure 4-73
and install the blower cover.
Section XIII. MAINTENANCE OF THE FRAME ASSEMBLY
4-51.
Lifting Eye Bracket and Fan Cover (Model
MEP-018A).
a.
Removal. Refer to figure 4-74 and remove
the lifting eye bracket and fan
cover.
Figure 4-74. Lifting else bracket and fan cover. removal
and installation (Model MEP-
018A).
b.
Cleaning, Inspection and Repair.
WARNING
Clean all parts in a well-ventilated area. Avoid inhalation of
solvent
fumes
and
prolonged
exposure of skin to cleaning solvent.
Wash exposed skin thoroughly. Dry
cleaning solvent (Fed. Spec. P-D-680
and P-S-661) used to clean parts is
potentially dangerous to personnel
and property. Do not use near open
flame or excessive heat. Flash point
of solvent is 100°F (38°C).
(1)
Clean items with cleaning solvent,
Federal Specification P-D-680 or
P-S-661 and dry thoroughly.
(2)
Inspect for cracks, breaks, or
other
damage.
Replace
a
defective bracket or fan cover.
c.
Installation. Refer to figure 4-74 and install
the lifting eye bracket and fan
cover.
4-52.
Tool Box (Model MEP-018A)
a.
Removal. Refer to figure 4-75 and remove
the tool box.
Change 8 4-85
