TM 5-6115-275-14
NAVFAC P-8-615-14
TO 35C2-3-452-1
Thus the meter (fig. 4-29) is showing the
following readings
Figure 4-29. Reading DC voltage (Simpson 160)
2.
TS-352B/U. Read the "DC" volts
scale for the range the red lead is plugged in at.
Range
Scale
50V
0-5 (and multiply by 10)
10V
0-10
2.5V
0-2.5
Thus the meter (fig. 4-30) is showing the
following readings:
Figure 4-30. Reading DC voltage (TS-352B/U).
3.
AN/URM-105. Read the upper,
black, straight-lined portion of the "AC and DC volts"
scale for the range the selector switch is set at.
Switch
Setting
Scale
1000
DC
Volts
0-10 (and multiply by 100)
100
DC
Volts
0-10 (and multiply by 10)
10 DC Volts
0-10
1 DC volt
0-10 (and divide by 10)
Thus the meter (fig. 4-31) is showing the
following readings:
4-37
