Test.

TM 5-6115-271-14

TO 35C2-3-386- 1

TM-05926A-14

NAVFAC P-8-613-14

voltage will normally be 120 volts AC for 60 and 400

b. Test.

Hz sets and 30 volts AC for 28 volt DC sets.

(1) Stop the generator set and disconnect

(3) Observing polarity, with a multimeter

either the positive or negative lead from the frequency

measure DC micro ampere current output on + and

converter to the frequency meter.

terminal of the frequency converter. This DC

micro ampere current should be within the 0 to 200

(2) Start the generator set and measure input

micro ampere range, and at 120 volts 60 Hz operation,

voltage across terminals L-L with a multimeter. This

will be close to 100 micro amperes.