TM5-6115-271-14
TO 35C2-3-386-1
TM 05926A-14
NAVFAC P-8-613-14
(1) Remove voltage regulator, refer to step b
CAUTION
Removal.
While using a soldering iron, caution should
(2) Test power transistor Q2.
be taken to prevent damage to components and
(a) Locate power transistor Q2 (1, Figure 8-1)
printed circuit board from excessive or
on the back of the voltage regulator housing
prolonged applied heat. Damage could result to
replacement items, rendering them unsuitable
for operation.
PIN:
025150-012
*U.S. GOVERNMENT PRINTING OFFICE: 1993- 755-028/80242
Change 12
