TM 5-6115-271-14
TO 35C2-3-386-1
Figure 4-18. had terminals and insulator, removal and installation (Model MEP-016A).
Section IX. MAINTENANCE OF THE FUEL SYSTEM
(3) Refer to figure 4-12 and remove the fuel
4-26. General
tank.
This section includes maintenance instructions
b. Inspect. Inspect the fuel tank for dents,
for the fuel tank, fuel hose, fuel line, fuel selector
valve, fuel filter, and fuel filter bracket.
cracks, or other damage. Replace if necessary.
4-27. Fuel Tank
c. Installation.
(1) Refer to figure 4-12 and install the fuel
a. Removal.
tank.
(1) Remove the fuel tank drain plug (located
(2) Refer to figure 4-19 and connect the fuel
on the fuel tank at the engine end of the genera-
hose.
tor set) and drain the fuel tank.
(3) Install the fuel tank drain plug and fill the
(2) Refer to figure 4-19 and disconnect the fuel
fuel tank (para 4-lb(2)).
hose.
