TM 5-6115-271-14
TO 35C2-3-386-1
TM-05926A-14
NAVFAC P-8-613-14
4-25A. Replace Lost or Broken Terminal Clip (Re-
I
MEP-016A/C
tainer, Safety Clip)
NSN
MEP-021A/C
MEP-026A/C
The terminal clip is a component of both the load
Load and
Ground
9505-00-804-3814
terminal and the ground terminal. If the terminal clip
Ground
(0.042 inch)
is lost or broken, fabricate as follows: Requisition bulk
-
Load
wire as stated in the chart. Cut off about 3 inches of
(0.050 inch)
the wire, Cut the wire short enough to keep the clips
from touching another terminal or the generator
BULK WIRE CHART
frame in the open or closed position. Slip the wire
through the hole in the terminal and proceed as shown
in the views below.
4-24.1/(4-24.2 blank)
Change 9