TM 5-6115-596-14
Organizational Preventive Maintenance Checks and Services
Table 4-1.
Paragraph
Item to be
Sequence
Procedure
No.
Inspected
Reference
Lo 5-2805-203
1
Lubricate engine, and report
Lubrication
leaking oil seals or oil
-12
pan gasket to direct
support personnel.
2
TM 5-2805-203-14
breathers
TM 5-2805-203-14
3
Air cleaner,
cleaner hoses,
& preheater.
4
High tension
TM 5-2805-203-14
cables
WARNING
after every 100 hours of continuous operation, or at
least monthly during intermittent operation. If neither
looseness nor misalignment is detected after six months
(or 600 hours) of operation, further inspection may be
performed on a six-month periodic basis. Any looseness
whereas any detection of looseness or misalignment of
drive keys, bushings, or pulleys should be reported to
Direct Support level for correction.
Replace broken & frayed
5
Drive belts
drive belts. Check drive
belt tension. Adjust
drive belts showing im-
proper tension.
6
or holes. Tighten connec-
there are indications of
leaks.
7
Fuel system
through 4-22
evidence of leaks. Replace
fittings and hoses that are
damaged, worn, or leaking.
Wiring harness Replace broken, frayed, or
8
cables & leads
damaged electrical cables
and leads.
Change 1
4-5