TM 5-6115-596-14
d.
Proper Lubrication Levels.
Observe lubricant levels closely
and replenish when necessary to maintain proper levels.
Refer to
Do not overfill.
3-4.
Lubrication After Subjection to Water.
a.
Check lubricant in engine.
If water has contaminated the
lubricant,
drain lubricant, remove filter, flush, install new filter
element, and refill.
If water has contaminated the fuel,
Check fuel in tank.
b.
drain off water or drain fuel, drain sediment bowl, clean filter,
and refill with clean fuel.
e.
Clean all surfaces exposed to water, and touch up with paint
Coat unpainted external metal parts with preserva-
where necessary.
tive lubricating oil (PE).
If moisture is
Inspect air cleaner element for moisture.
d.
present, clean and dry element.
Section II. OPERATOR TROUBLESHOOTING
3-5.
General.
This section contains information useful to the operator in
diagnosing and correcting unsatisfactory operation or failure of
a.
Table 3-1 lists the
common malfunctions which you may
find
You
during the operating or maintenance of the generator set.
should perform the tests/inspections in the order listed.
3-4