TM 5-611.275-14
NAVFAC P-8-615-14
TO :’5C2-3-452-1
Section IV. TROUBLESHOOTING
3-6.
General
a.
This
section
contains
troubleshooting
information for locating and correcting operating troubles
which may develop in the generator set. Each
malfunction for an individual component, unit, or system
is followed by a list of tests or inspections which will help
you to determine probable causes and corrective actions
to take. You should perform the tests/inspections and
corrective actions in the order listed.
b.
This manual cannot list all malfunctions that
may occur, nor all tests or inspections and cor-
rective actions. If a malfunction is not listed or can not
be corrected by listed corrective actions, notify your
supervisor.
3-7.
Operator’s Troubleshooting
NOTE
Before you use Table 3-4, be sure you
have per 4 formed all applicable
operating checks.
Refer to Table 3-4 for operator’s troubleshooting
procedures.
Change 2 3-5/(3-6 blank}
