TM 5-6115-271-14
TO 35C2-3-386-1
TM-05926A-14
NAVFAC P-8-613-14
MAINTENANCE OF THE HEAT SINK ASSEMBLY
9-1. General
Installation.
(2)
The heat sink assembly is made up of the following
components: Heat sink, LH; Rectifier, LH; Heat sink,
heat sink.
RH; and Rectifier, RH.
4-24).
Refer to figure 9-1 to inspect, remove and install the
Install external shunt (para 4-24).
(c)
diode rectifier and terminal block.
Install suppression capacitors (para 4-13).
(d)
9-3. Heat Sink (Model MEP-026A, MEP-026C)
Replace circuit breaker (para 8-8).
(e)
a. Right Side Heat Sink.
b. Left Side Heat Sink.
(1) Removal.
(1) Removal.
(a)
Remove circuit breaker (para 8-8).
Remove suppression capacitors (para 4-13).
(b)
Remove external shunt (para 4-24).
(c)
heat sink.
Remove bussbars and load terminals (para
(d)
4-24).
(2) Installation.
heat sink.
sink.
Install the frequency converter (para 8-4).
(b)
