TM 5-6115-596-14
Figure 4-8.
Removing or installing mufflers.
(2) Remove two screws, and remove bracket from engine.
manifolds.
Inspect mufflers for holes, cracks,
Inspection and Repair.
b.
Replace mufflers that show any one of these defects.
and deformation.
Installation.
c.
two clamps.
(2) Position muffler mounting bracket to top of engine and
mufflers, and secure with two screws.
(3) Secure mufflers to bracket with six washers and two screws.
4-21.
Flanged Manifold (fig. 4-9).
NOTE
The front and rear flanged
manifolds are removed and
installed in a similar man-
ner.
4-23
