TM 5-6115-405-15
Figure 5-8. Removal of starter fan housing.
grommets in the drivecase and the stator
(5) Remove two screws on the right-hand
mounting plate.
side holding the stator mounting plate,
and slide out the junction box.
(8) Remove two remaining screws (left-hand
side) holding stator mounting plate, and
(6) Remove two output connector screws.
remove plate with generator stator
Disconnect stator leads from output
attached.
connector.
(9) Remove generator stator and needle
(7) Loosen cable clamp screw to free stator
bearing from stator mounting plate if
leads. Pull the leads through the.
required.
5-11