TM 5-6115-405-15
CHAPTER 3
OPERATOR AND ORGANIZATIONAL MAINTENANCE
INSTRUCTIONS
Section I. SPECIAL TOOLS AND EQUIPMENT
clean out clogged perforations of the muffler as
3-1. Special Tools and Equipment
described in paragraph 3-8 and as shown in figure 3-4.
The only special tool required by operator or
3-2. Basic Issue Tools and Equipment
organizational maintenance personnel for maintenance
be fabricated as shown in figure 3-1 The tool is used to
Repair parts issued with the generator set are listed
in the basic issue items list, appendix B of this manual.
Figure 3-1. Fabrication of muffler cleaning tool
Section II. PREVENTIVE MAINTENANCE SERVICES
corrected before they result in serious damage or
3-3. General
failure.
The necessary preventive maintenance
services to be performed are listed and described in
To insure that the generator set is ready for
paragraphs 3-4 and 3-5. Item numbers indicate the
operation at all times, it must be inspected
sequence of minimum inspection requirements. Defects
systematically so that defects may be discovered and
3-1