TM 5-6115-332-14
P-8-614-14
TO 35C2-3-424-1
(c) Read the meter. (The examples (fig. 4-16)
Thus the meter (fig. 4-16) (2) is showing the fol-
shows how to read all three multimeters). If the lowing readings:
needle tries to move off the scale to the left, reverse
the probes on the circuit.
1. Simpson 160. Read the “DC” volts
scale for the range the selector switch is set at.
Switch Setting
Scale
V/DC 50
0-50
V/DC 10
0-10
V/DC 2.5
0-25 (and divide by 10)
Thus, the meter (fig. 4-16) (1) is showing the fol-
lowing readings:
Figure 4-16. Reading DC voltage.
(Sheet 2 of 3).
Figure 4-16. Reading DC voltage.
straight-lined portion of the “AC and DC volts”
scale for the range the selector switch is set at.
Switch Setting
Scale
1000 DC Volts
0-10 (and multiply by 100)
100 DC Volts
0-10 (and multiply by 10)
10 DC Volts
0-10 (and divide by 10)
(Sheet 1 of 3).
Thus, the meter (fig. 4-16) (3) is showing the fol-
lowing readings:
2. TS-352B/U.
Read the “DC” volts
scale for the range the red lead is plugged in at.
Range
Scale
50V
0-5 (and multiply by 10)
10V
0-10
2.5V
0-2.5
4-31
