TM 5-6115-329-14
TO 35C2-3-440-1
b. Engine. The Military Standard Engine
(model 1A08-3) is a 4-stroke cycle, overhead valve,
air-cooled engine. It is fully radio interference sup-
pressed and fungus-proofed. This is a one-cylinder
engine which develops 1-1/2 horsepower at 3,600
rpm. Refer to TM 5-2805-256-14 for additional
information.
1-10. Tabulated Data (Operator/Crew
and Organizational Maintenance)
a. Identification. The generator set has three
major identification plates. They are an engine
plate, a generator plate, and a generator set plate.
The engine plate is mounted on the flywheel hous-
ing and indicates the make, model, serial number,
stock number, and other pertinent maintenance
data. The generator plate is mounted on the gener-
ator housing and indicates the type, National Stock
Number, manufacturer, Serial number, KW rating,
CPS, and power factor. The generator set plate is
mounted on the right hand side panel of the control
panel and indicates the manufacturer, type, serial
number, and National Stock Number.
b. Tabulated Data.
(1) Generator set manufacturer:
NSN 6115-00-923-4469 Bogue Electric
NSN 6115-00-940-7862 Rett Electronics Inc.
NSN 6115-00-940-7867 Rett Electronics Inc.
Model
Mode
Class
MEP-014A
60 Hertz
Utility
MEP-019A
400 Hertz
Utility
MEP-024A
28 VDC
Utility
Operating temperature range
Voltage output
Power factor
Capacities:
Fuel System
Lubricating oil
107oF - 65°F (42°C - 18oC)
Model Mep-014A and MEP-
019A, 120/240 VAC single
phase, except serial number
range SB710001 throug
h
SB710177 which are 120 VAC
only Model MEP-024A, 28 VDC
1.0
(Metric)
1 gallon (3.8 liters)
4/5 quart (0.76 liters)
(Metric)
Dimensions and Weights:
(DOD models DOD MEP-
019A and MEP-024A)
Length
Width
Height
Weight
(DOD model MEP-014A)
Length
Width
Height
Weight
20-5/8 inches (52.3875 cm)
18 inches (45.72 cm)
18 inches (45.72 cm)
98 pounds (44.1 kg)
(Metric)
20-5/8 inches (52.3875 cm)
18 inches (45.72 cm)
18 inches (45.72 cm)
78 pounds (35.1 kg)
Specification
DOD
model
MEP-014A
MIL-G-52732/l
DOD
model
MEP-019A
MIL-G-52732/2
DOD
model
MEP-024A
MIL-G-52732/3
(2) Engine:
Make
Model
Type
Number of cylinders
Bore
Stroke
Piston displacement
Compression ratio
Horsepower at 3,600 r.p.m.
Carburetor:
Make
Fuel Pump:
Make
T y p
e
Fuel pump outlet pressure
Air Cleaner:
Make
Type
Spark Plug:
Make
Type
Governor:
Make
Fuel Filter:
Make
Adjustments:
Spark plug gap
Contact point gap
Valve tappet clearance
(intake and exhaust)
Oil Capacity
Dimensions and Weights:
Length
Width
Height
Weight
(3) Fuel Strainer:
Manufacturer
Model
Military Standard Engine
1A08-3
4-Cycle, gasoline, overhead
valve, air cooled
1
2.250 in. (5.715 cm)
2 in. (5.08 cm)
8 cu in. (131.12 cu cm)
6:1
1.5
Military design
Military design
Diaphragm
(Metric)
3.0 to 4.5 psi
(0.2109 to 0.3163 kg per sq cm)
Military design
Dry
Military Standard
Shielded
Military design
Military design
0.028-0.033 in. (0.071-0.838 cm)
0.016-0.020 in. (0.040-0.050 cm)
0.007 in. to 0.009 in.
(0.017 to 0.027 cm) cold
1/2 qt (0.475 liters)
17-3/4 in. (45.08 cm)
17-3/4 in. (45.08 cm)
14-1/4 in. (36.19 cm)
29 lbs. (13.15 kg)
Imperial Eastman Corp,
186J
(4) Wiring Diagrams:
DOD Model MEP-014A
Refer to Figure 1-7
DOD Model MEP-019A
(Serial number range
JB66-0001 thru JB66-4730
Refer to Figure 1-8
DOD Model MEP-019A
(serial number range
SB71-0001 thru SB71-0177)
Refer to Figure 1-9
DOD Model MEP-024A
Refer to Figure 1-10
1-8
