REMOVAL AND INSTALLATION OF MAJOR COMPONENTS
6-1. Control Box
(4) Remove the screws and washers that se-
a. Removal. Refer to figure 6-1 and the follow-
cures the control box to the bottom resilient mounts
ing instructions to remove the control box.
Disconnect electrical cables from the con-
Remove the ground strap from the control
Remove the screws and washers which se-
control box to the generator housing.
and remove the control box.
(1) Position the control box in place on the re-
silient mounts and secure with washers and screws.
(2) Secure control box to the generator hous-
ing with washers and screws.
(3) Install ground strap.
(4) Reconnect electrical cables.
Figure 6-1. Control box, removal and installation.