Figure 8-12. Engine drip pan, removal and installation (Model MEP 018A).
Cleaning, Inspection, and Repair.
Clean all parts in a well-ventilated
area. Avoid inhalation of solvent
fumes and prolonged exposure of
cleaning solvent (Fed. Spec. P-D-680
and P-S-661) used to clean parts is
potentialy dangerous to personnel
Do not use near open flame or
excessive heat. Flash point of solvent
is 100° F(38°C).
Clean items with cleaning solvent, Fed.
Spec. P-D-680 or P-S-661, and dry thoroughly.