NOTE: REMOVE 8 NUTS AND BOLTS THAT SECURE SKID BASE TO WOODEN SKID AND RAMISE AND BLOCK
SKID BASE FOR ACCESS TO MOUNTING NUTS.
Figure 8-22. Engine, engine support drip pan, deflector plates and baffleplates,
removal and installation (Model MEP-023A).
Cleaning, Inspection, and Repair.
Clean all parts in a well-ventilated
area. Avoid inhalation of solvent
fumes and prolonged exposure of
skin to cleaning solvent. Wash
cleaning solvent (Fed. Spec. P-D-680
and P-S-661) used to clean parts is
potentially dangerous to personnel
and property. Do not use near open
flame or excessive heat. Flash point
of solvent is 100°F(38 C).
Clean items with cleaning
solvent, Fed. Spec. P-D-680 or P-S-661, and
Inspect items for cracks, breaks, and
dents. Replace a damaged item.
Refer to figure 8-22 and install the
engine support, drip pan, deflector plates and faffle
Refer to paragraph 6-2 and install the
generator and engine.
SKID BASE (MODEL MEP-023A)
Remove the fuel tank and adapter,
Remove the grounding stud, figure 8-