TM 5-6115-596-14
to a serviceable condition under typical field operating conditions.
This time includes preparation time, troubleshooting time, and qual-
ity assurance/quality control time in addition to the time required
to perform the specific tasks identified for the maintenance func-
The symbol
tions authorized in the maintenance allocation chart.
designations for the various maintenance levels are as follows:
c . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..Operator or crew
o . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..Organization maintenance
F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Direct support maintenance
H . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General support maintenance
D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..Depot maintenance
Column 5, Tools and Equipment.
Column 5 specifies, by code,
e.
those common tool sets (not individual tools) and special tools, test,
and support equipment required to perform the designated function.
(Not Used).
This column shall contain a letter code in
Column 6, Remarks.
f.
alphabetical order which shall be keyed to the remarks contained in
Section IV.
(Not Used).
Column Entries Used in Tool and Test Equipment Requirements,
B-4 .
(Not Used ).
The tool and
a.
Column 1, Tool or Test Equipment Reference Code.
test equipment reference code correlates with a maintenance function
on the identified end item or component.
The lowest level of maintenance
b.
Column 2, Maintenance Level.
authorized to use the tool or test equipment.
Name or identification of the tool or
c.
Column 3, Nomenclature.
test equipment.
B-4
