TM 5-6115-596-14
2.
CONTINUED
Disconnect relay-to-start switch lead at relay.
Test 4.
Place prods across connector to ground.
If reading is lower or higher than 50-52 ohms,
relay is defective. Refer to direct support
maintenance personnel.
Disconnect relay-to-regulator battery connector lead
Test 5.
Place prods across relay connectors.
relay.
If reading is lower than infinity, relay is
Refer to direct support maintenance
defective.
personnel.
Test 6.
Disconnect relay-to-start switch lead at relay.
With battery current through relay, place prods
across connector to ground.
If reading shows an open circuit, switch is
Refer to direct support maintenance
defective.
personnel.
Change 2
4-14.2
