TM 5-6115-434-12
from a military vehicle equipped with a 24v dc output receptacle to the power unit for auxiliary starting power.
(3)
One 400 Hz remote power cable assembly for connection. between power units for remote operation of
centilating fans.
(4)
One dc electrical power standby cable assembly for connecting the 24v dc systems of two power units
together to provide for standby operation of one power unit.
(5)
One 400 Hz electrical power output cable assembly for connection of the power unit 400 Hz electrical
system to other elements of the MUST hospital as required.
(6)
One 60 Hz electrical power output cable assembly for connection of the power unit 60 Hz electrical system
to other elements of the MUST hospital as required.
(7)
One remote temperature sensing cable assembly for connection of a remote thermostat to the power unit
conditioned air system.
(8)
One dual element fuel filter assembly for filtering inlet fuel to the power unit.
(9)
One fuel hose assembly with shutoff valve for connection of the fuel filter assembly to the fuel inlet fitting
on the power unit.
(10)
Three fuel hose assemblies for connection of an external fuel source to the fuel filter assembly.
(11)
One electrically heated water supply and drain water hose assembly for connection of an external water
source to the power unit water system.
(12)
One electrically heated dual water hose assembly for connection of the power unit water system to other
elements of the MUST hospital.
(13)
One compressed air hose assembly for connection of the power unit compressed air hose assembly for
connection of the power unit compressed air outlet to the MUST hospital inflatable elements for delivery of inflation air.
(14)
One vacuum hose assembly for connection of the power unit vacuum system to other elements of the
MUST hospital that require vacuum service.
(15)
Eight conditioned air duct assemblies for connection of the power unit conditioned air duct assemblies for
connection of the power unit conditioned air system to other elements of the MUST hospital.
(16)
Four conditioned air duct adapter assemblies used to join the air conditioning duct assemblies together as
required for additional length.
(17)
One inflation and deflation ejector assembly used to inflate and/or deflate the inflatable elements of the
MUST hospital.
(18)
One junction box and valve manifold assembly used to connect the inflation ejector assembly to the
inflation manifold of the inflatable element.
(19)
One divider panel to separate the conditioned air outlet compartment.
(20)
Two drain hoses to drain condensation from the upper conditioned air outlet compartment.
1-4. Identification and Tabulated Data
a.
Identification. The power unit has 14 major identification plates and 11 major instruction plates.
(1)
Power unit identification plate. Located on the right side of the unit above the electrical connection panel.
Specifies the nomenclature, stock number, serial number, part number, model number, contract number, series number,
and manufacturer.
(2)
Gas turbine engine identification plate. Located on the engine accessory drive housing on the left side.
Specifies nomenclature, part number, model number, serial number, and manufacturer.
(3)
400 Hz generator. Located on left side of generator housing. Specifies nomenclature, part number, style,
rated rpm, frequency, serial number, kva (kilovolt amperes) rating, P/F (power factor), ampere rating, voltage, and
manufacturer.
(4)
60 Hz generator. Located on side of generator housing. Specifies nomenclature, part number, style, rated
rpm, frequency, serial number, kva rating, P/F, ampere rating, voltage, and manufacturer.
(5)
Refrigeration compressors (2 used). Located on compressor inlet housing. Specifies nomenclature, serial
number, part number, voltage, cycles, phase, amperes, duty cycle,
1-23
