The starting rope, kept with the generator set at all times, is
used to crank the engine manually by wrapping rope clockwise around
The starting pulley is located at
the starting pulley and pulling.
the front of the engine.
Voltage Adjusting Rheostat (fig. 2-1 or 2-1.1).
The rheostat, located on the control panel, regulates the
Voltage is increased by manually turning
the knob under the cap in a clockwise direction.
sets, serial numbers 929-001 thru 929-290) have no rheostat
The output voltage is fixed and non-adjustable.)
The fuel tank cap, located on top of the fuel tank, is turned
counterclockwise to remove and clockwise to install.
Fuel tank cap.