TM 5-6115-434-12
Reference Maintenance
code
level
Nomenclature
Tool number
169-J
D
Test Set Electrical Power
(99193) 257916-1
170-J
D
Test Set, Insulation Breakdown, AC-DC
6625-519-2204
171-J
D
Holder, Bearing Press
4920-153-294
172-J
D
Adjuster, End Play, Rotor Multi-Purpose
4920-601-1144
173-J
D
Test Set, Armature
66256-6-1601
174-J
D
Test Set, Actuator Load
(99193) 268100-1
175-J
D
Adapter Actuator Torque
(99193) 270906-3
176-J
D
Coupling, Shaft, Rigid
(99193) 278130
177-H
O
Wire Twister, Plier
5120-305-2306
Section IV. REMARKS
Reference Code
Remarks
A-B
Test engine using engine analyzer test set.
B-I
Repair consists of welding. (Do not weld ceramic coated tubes).
C-I
Minor weld only.
D-A
Turbine Nozzle Assembly may be rotated 1200 as warranted by inspection.
E-D
Speed and cracking pressure only.
F-I
Replace "O" rings and diaphragms only.
G-C
Clean fuel atomizer (do not use abrasive material).
H-B
Test for flow divider opening only.
I-C
Clean only if new ignitor plug is not available.
J-D
Adjust opening rate only.
K-I
Replace seals only.
L-I
Repair includes using a repair kit.
M-H
Heat Exchanger, Air, applicable to model PPU85-4 and Winterization Kit, P/N
891459-1 only.
C-13
