TM 5-6115-332-14
P-8-614-14
TO 35C2-3-424-1
(b)
Power Output Connection.
Position the circuit breaker in the OFF
position and connect the load trans-
mission cables to the load terminals of
the load terminal board (figs. 1-1 and
Before attempting to connect
1-3), in accordance with the output
the load cables, make sure the
voltage and phase requirements, as shown
generator set is completely
by table 4-1.
Refer to figure 2-4 for
shut-down.
the output selector switch.
Change 1
4-2.1/(4-2.2 blank)