MAINTENANCE OF THE FRAME ASSEMBLY
This section covers organizational maintenance
for the lifting eye and lifting eye bracket, guard
frame, and toolbox. These items are all identical on
both the model MEP-017A and the model MEP-
022A generator sets.
4-47. Guard Frame.
a. Removal. Refer to figure 4-33 and the follow-
ing instructions to remove the guard frame.
(1) Remove the nuts, washers, and screws se-
curing the guard frame to the skid base.
(2) Remove the screw and lockwasher that se-
cures the guard frame to the flywheel housing.
(3) Remove guard frame from the generator
Figure 4-33. Guard frame, removal and installation.