Figure 7-6. Circuit breaker, removal and installation (Model IlEP-023A).
Cleaning, Inspection, and Repair.
Clean the circuit breaker with a
clean, dry cloth.
Inspect the circuit breaker for
cracks, breaks, and improper
operation. Replace if damaged or
Installation. Refer to figure 7-5 or 7-6 and
install the circuit breaker on the
applicable model generator set.
Test the voltage regulator, refer to paragraph
Figures 7-7, 7-8, 7-8.1, 7-9, and 7-12, including all data on pages 7-8.1/(7-8.2 blank), 7-9, 7-10, 7-11, and 7-12, are
7-8 Change 8