Cleaning, Inspection and Repair.
l parts in a well-ventilated area. Avoid inhalation of
exposure of skin to cleaning solvent.
Wash exposed skin thoroughly. Dry
cleaning solvent (Fed. Spec. P-D-680
and P-S-661) used to clean parts is
potentially dangerous to personnel
and property. Do not use
near open flame or excessive heat. Flash point of solvent
is 100° F(38°C).
Clean door with cleaning solvent,
Fed. Spec. P-D-680 or P-S-661,
and dry thoroughly.
Clean. receptacle with a clean dry
Inspect for cracks, breaks or other
damage, replace a defective door
Installation. Refer to figure 4-65 and install
Figure 4-65. Convenience outlet receptacle connector and lower door, removal and installation (Model MEP-018A).