Figure 4-51. Fuel filer, disassembly (Model MEP-018A).
Disassembly. Refer to figure 4-51 and
disassemble the fuel filter.
Cleaning, Inspection and Repair.
Clean all parts in a well-ventilated
area. Avoid inhalation of solvent
fumes and prolonged exposure of
skin to cleaning solvent. Wash
cleaning solvent (Fed. Spec. P-D-680
and P-S-661) used to clean parts is
potentially dangerous to personnel
and property. Do not use near open
flame or excessive heat. Flash point
of solvent is 1000 F(38°C).
Clean items with cleaning solvent, Fed.
Spec. P-D-680 or P-S-661, and dry
Inspect the fuel hoses for cuts, breaks,
or deterioration. Inspect the fuel lines
for cracks, breaks, or other damage.
Replace a damaged or defective fuel
hose or fuel line.
Inspect all parts for cracks, breaks or
Replace a damaged or defective part.
Assembly. Refer to figure 4-51 and
assemble the fuel filter.
Installation (Serial Number Range except
MA68-0001 thru MA68-2-987. Refer to
figure 4-49 and install the hoses, lines and
Installation (Serial Number Range MA68-
0001 thru MA68-2987. Refer to figure 4-50
and in- stall the hoses, lines and filters.
Fuel Lines and Filter (Model MEP-023A)
Removal. Refer to figure 4-52 and remove
the fuel filter and lines.