Cleaning, Inspection and Repair.
Clean all parts in a well-ventilated
area. Avoid inhalation of solvent
fumes and prolonged exposure of
skin to cleaning solvent. Wash
cleaning solvent (Fed. Spec. P-D-680
and P-S-661) used to clean parts is
potentially dangerous to personnel
and property. Do not use near open
flame or excessive heat. Flash point
of solvent is 100° F(38°C).
Clean items with cleaning solvent, Fed.
Spec. P-D-680 or P-S-661, and dry
inspect the fuel tank and adapters for
damaged threads, cracks or other
defects. Replace a defective fuel tank
Install the fuel tank and fuel tank
adapter as shown by figure 4-48.
Install the fuel drum adapter (fig. 4-
Fuel Hoses, Lines, and Filter (Model MEP-
Removal (All Serial Number Ranges
except MA 68-0001 thru (M.A68-2.987).
Refer to figure 4-49 and remove hoses.
lines, and fittings.
Figure 4-49. Fuel hoses, lines and filter, removal and
installation (all serial numbers except
MA68-O0001 thru MA68.-2987) (Model