T M 05926A-14
cap from filler neck (A, fig. 4-12) and remove the
fuel tank strainer by lifting it from the filler neck.
3-14. Fuel Tank Cap and Chain Assembly
a. Inspect. Inspect the fuel tank cap and chain
fitting, and other obvious damage.
b. Removal and Installation. Refer
to A, figure
to remove and install the fuel tank
3-15. Muffler Brackets, Muffler and Muffler
Inspect the muffler brackets, muffler and muf-
removal and/or installation to organizational
Clean the generator and inspect it for cracks,
breaks, loose mountings, and other obvious dam-
age. If the generator is damaged, refer to organi-
zational maintenance personnel.
a. The winterization kit is of a waterproof nylon
material with a flame retarding coating. The ma-
terial is flexible for easing storing when not in
use. The kit is to permit operation of the unit at
3-13. Fuel Tank Strainer
temperatures of 25 F. (-32 C.) to 65 F.
(54 C). When in use, the kit completely covers
a. Cleaning and Inspection. Inspect fuel tank
the operating unit except for air intake and ex-
haust outlet ports.
Clean strainer as necessary. Replace a damaged
other damage. Replace a damaged kit.
b. Removal and Installation. Remove fuel tank